Ethan95 5.0
New Member
- Joined
- Feb 6, 2023
- Messages
- 13
- Reaction score
- 3
I recently installed a new upper and lower intake manifold. I removed the distributor and put it back on top dead center and all that. The car did run but it was not making the power it’s supposed too. I took out the distributor and re stabed it. Now the car will not start. When I try to crank it, it sounds like it wants so start but it doesn’t. I can smell fuel and the air-gas mixture is coming out of the exhaust when trying to start it. Any ideas? Also here is a picture.