Where do hoses go, 2 PVCs?

[Lowtech]

Attached is a picture of the engine, a 98, and how the hoses were connected. On the left, the screwdriver enters an empty hole in the valve cover. Is this for a 2nd PVC valve?
The red arrow points to the line going to the PVC valve on the driver's side of the engine.
The yellow arrow on the right, with the tool stuck in the throttle body, has a 90-degree elbow but doesn't connect anywhere. Where does this go?


I check pictures of engine bays when I see them to figure out hose connections. The only one I think is right is the PVC connection. Do connections vary by year? Are there 2 PVC valves?
I'm lost.

 

[RAU03MACH]

PCV valve goes where screwdriver is at

 

[RAU03MACH]

there is only 1 pvc valve

 

[RAU03MACH]

plug that one with a vac cap the one with the plyer stuck in it

 

[RAU03MACH]

this is where pcv line goes to marked in blue

 

[Lowtech]

PCV valve goes where screwdriver is at

Where does it go to? What about the one on driver's side?
Thanks for your help

 

[RAU03MACH]

follow the blue line cap off the blue circle
there is only one pcv valve your screw driver is there

 

[Lowtech]

View attachment 35654View attachment 35654
follow the blue line cap off the blue circle
there is only one pcv valve your screw driver is there

Got it, Thanks. Now to find out where the orange pliers port should go

 

[Mustang5L5]

Edit: bad pic

 

[Mustang5L5]

Edit: bad pic

 

[RAU03MACH]

your going to confuse this guy more

 

[Lowtech]

A wider angle.

Red to red (intake tube to driver's valve cover) and then blue to my interpretation of a blue screwdriver

View attachment 35662

Where is the blue line going, back of the throttle body? Red makes sense, that's there already.

 

[Lowtech]

your going to confuse this guy more

Yes, it's confusing unless the blue line is passenger-side PVC to the back of the throttle body. Then everything has a place to go.

 

[Mustang5L5]

Where is the blue line going, back of the throttle body? Red makes sense, that's there already.

DIsregard my previous pics. Lets try this way.

This would be the OEM line. Unsure if Dorman or anyone else reproduces it. Part number F6ZZ-6C324-A for 1996-2002 Mustangs.

Connector And Hose Assy, Crankcase Vent, Original, Prior Part Numbers F6zz-6c324-Ca, F6zz-6c324-A - #M-6C324-110 - National Parts Depot

Buy part #M-6C324-110 Connector And Hose Assy, Crankcase Vent, Original, Prior Part Numbers F6zz-6c324-Ca, F6zz-6c324-A for your classic 1996-2002 Mustang from National Parts Depot. Free shipping on orders over $300, fast delivery & everyday low pricing! Order now!

www.npdlink.com

That line installs here between your yellow arrows. Screwdriver to pliers.

 

[SnakeBit!]

if I recall correctly the passenger side goes to the intake tube that goes from the throttle body to the airbox or CAI. the driver's side goes to the pcv.

 

[Mustang5L5]

Line in place from pCV to front of plenum




Line at rear of plenum hooks to this vac line which goes off into the pass fender.

 

[RAU03MACH]

i had mine plugged on the back side worked fine
as long as there is a strong vacuum present for pcv no problem

 

[RAU03MACH]

ill give you a little better cleaner look basically same thing